The Relationship Between Product Quality Management And Customer Satisfaction Control At CV Wery Group, Gunungsitoli City

Authors

  • Augusmina Zebua Universitas Nias
  • Kurniawan Sarototonafo Zai Universitas Nias
  • Jeliswan Berkat Iman Jaya Gea Universitas Nias
  • Heniwati Gulo Universitas Nias

DOI:

https://doi.org/10.37676/jmea.v4i2.902

Keywords:

Product Quality Management, Customer Satisfaction, Quality Control, Customer Loyalty, CV Wery Group

Abstract

This research aims to identify and analyze the relationship between product quality management and customer satisfaction control at CV Wery Group in Gunungsitoli City. The background of this study stems from the importance of product quality in maintaining customer loyalty and the company’s competitiveness, especially in a local market characterized by geographical and operational challenges. The research method used is a quantitative approach with a survey technique. Data were collected through the distribution of Likert-scale questionnaires to 83 respondents, consisting of employees and managers of the company. The data were analyzed using validity and reliability tests, Pearson correlation, simple linear regression, coefficient of determination, and t-test to determine the strength and significance of the relationship between the variables.The results of the study indicate a significant and positive relationship between product quality management and customer satisfaction control. This is evidenced by the Pearson correlation coefficient, which falls under the strong category, and a t-test significance value of < 0.05, indicating that the alternative hypothesis is accepted. The coefficient of determination (R²) shows that a large portion of the variation in customer satisfaction control can be explained by the product quality management implemented by the company. In other words, the better the product quality management applied by CV Wery Group, the greater its ability to control and enhance customer satisfaction.

Downloads

Download data is not yet available.

References

Andani, S., Zulfah, & Midani Rizki, L. (2023a). Validitas Instrumen Penelitian: Pengaruh Pendekatan Ethno-RME Terhadap Kemampuan Penalaran Matematis Peserta Didik Kelas VII di SMPN 2 Bangkinang Kota. Jurnal Pengabdian Masyarakat Dan Riset Pendidikan, 2(2), 07–11. https://doi.org/10.31004/jerkin.v2i2.190

Andani, S., Zulfah, & Midani Rizki, L. (2023b). Validitas Instrumen Penelitian: Pengaruh Pendekatan Ethno-RME Terhadap Kemampuan Penalaran Matematis Peserta Didik Kelas VII di SMPN 2 Bangkinang Kota. Jurnal Pengabdian Masyarakat Dan Riset Pendidikan, 2(2), 07–11. https://doi.org/10.31004/jerkin.v2i2.190

Arifin, K. M., & Widwi Handari Adji. (2023). Pengaruh Kompetensi Karyawan Terhadap Kualitas Pelayanan Pelanggan di Kedai Kopi Tovi Kohi. JSMA (Jurnal Sains Manajemen Dan Akuntansi), 15(2), 190–205. https://doi.org/10.37151/jsma.v15i2.141

Arribe, E., Hafsari, R., Subekti, A. A., & Aragati, A. H. (2023). PERANCANGAN SISTEM INFORMASI MANAJEMEN INVENTORI PADA RETAIL PT. STARS INTERNASIONAL. PROSISKO: Jurnal Pengembangan Riset Dan Observasi Sistem Komputer, 10(2), 103–108. https://doi.org/10.30656/prosisko.v10i2.6933

Ariani, W. (2016). Manajemen Kualitas pdf. Managemen, 1–61. In Angewandte Chemie International Edition, 6(11), 951–952. (Vol. 3, Issue 1).

Dalal, M., Carberry, A., & Archambault, L. (2021). Developing a Ways of Thinking Framework for Engineering Education Research. Studies in Engineering Education, 1(2), 108. https://doi.org/10.21061/see.38

Faula Agoestian, I. S. B., Nurmiyati, N., & Ayu, P. D. (2023). ANALISIS PENGARUH PRODUK, PROMOSI DAN FASILITAS TERHADAP VOLUME PENJUALAN (Studi Kasus Di Toko Roti AAN Ungaran). BISECER (Business Economic Entrepreneurship), 6(1), 79. https://doi.org/10.61689/bisecer.v6i1.483

Febriana, W., Palit, J., & Cahyadi, I. (2022). Peran Supply Chain Quality Management (SCQM) Terhadap Pencapaian Operasional Performance Perusahaan Daerah Agro Selaparang Lombok Timur Melalui Quality Performance. Jurnal Pustaka Manajemen (Pusat Akses Kajian Manajemen), 2(1), 32–44. https://doi.org/10.55382/jurnalpustakamanajemen.v2i1.214

Fernanda, J. W., Luthifiana, V., & Akhyar, M. K. (2022). Analisis Partial Least Square Structural Equation Model (PLS-SEM) untuk Pemodelan Penerimaan Sistem Jaringan Informasi Bersama Antar Sekolah (JIBAS). J Statistika: Jurnal Ilmiah Teori Dan Aplikasi Statistika, 15(2), 292–297. https://doi.org/10.36456/jstat.vol15.no2.a6436

Firmansyah, D., & Dede. (2022). Teknik Pengambilan Sampel Umum dalam Metodologi Penelitian: Literature Review. Jurnal Ilmiah Pendidikan Holistik (JIPH), 1(2), 85–114. https://doi.org/10.55927/jiph.v1i2.937

Hisprastin, Y., & Musfiroh, I. (2020a). Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang Sering Digunakan dalam Manajemen Risiko Mutu di Industri. Majalah Farmasetika, 6(1), 1. https://doi.org/10.24198/mfarmasetika.v6i1.27106

Hisprastin, Y., & Musfiroh, I. (2020b). Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang Sering Digunakan dalam Manajemen Risiko Mutu di Industri. Majalah Farmasetika, 6(1), 1. https://doi.org/10.24198/mfarmasetika.v6i1.27106

Kamaruddin, K., & Hamizar, A. (2022). KAJIAN MANAJEMEN SUPPLY CHAIN DAN KETERKAITANNYA TERHADAP KETAHANAN PANGAN. Amal: Jurnal Ekonomi Syariah, 4(02). https://doi.org/10.33477/eksy.v4i02.4118

Kingkin Nurani Yekty, & Grace Tianna Solovida. (2021). Pengaruh Strategi Kewirausahaan dan Modal Sosial Terhadap Kinerja Keuangan serta Non-Keuangan Melalui Manajemen Rantai Pasokan Berkelanjutan. Jurnal Wahana Akuntansi, 16(1), 52–73. https://doi.org/10.21009/wahana.16.014

Lisarani, V. (2024). Pengaruh Penerapan Problem-Based Learning dalam Mata Kuliah Statistika terhadap Minat Mahasiswa Pendidikan Keagamaan Katolik untuk Melaksanakan Penelitian Kuantitatif. Jurnal Penelitian Pendidikan Agama Katolik, 4(2), 120–133. https://doi.org/10.52110/jppak.v4i2.139

Mutlu, A., Onsuz, M. F., Kilinc, A., Ozcan, L., Tepetas, M., & Metintas, S. (2024). Turkish validity and reliability of telemedicine awareness, knowledge, attitude and skills questionnaire. Northern Clinics of Istanbul, 11(1), 18–26. https://doi.org/10.14744/NCI.2023.79989

Nur Hidayati, Mardiyana, Mardiputra, I. M., & Rismawati. (2024). Analisis Penerapan Supply Chain Management terhadap Efektivitas Kinerja Supply Chain melalui Total Quality Management sebagai Mediasi. JSMA (Jurnal Sains Manajemen Dan Akuntansi), 16(2), 207–215. https://doi.org/10.37151/jsma.v16i2.199

Nurdiana, I. (2020). Perbedaan Penelitian Kuantitatif Dan Kualitatif. https://doi.org/10.31219/osf.io/t2d7x

Rahman, R., & Sutanto, F. A. (2023). Data Mining Untuk Memprediksi Tingkat Kepuasan Konsumen Gojek Menggunakan Algoritma Naive Bayes. Jurnal Interkom: Jurnal Publikasi Ilmiah Bidang Teknologi Informasi Dan Komunikasi, 18(1), 8–18. https://doi.org/10.35969/interkom.v18i1.280

Downloads

Published

2025-08-05

How to Cite

Zebua, A., Zai, K. S., Gea, J. B. I. J., & Gulo, H. (2025). The Relationship Between Product Quality Management And Customer Satisfaction Control At CV Wery Group, Gunungsitoli City . Journal of Management, Economic, and Accounting, 4(2), 673–686. https://doi.org/10.37676/jmea.v4i2.902

Issue

Vol. 4 No. 2 (2025): Juli-Desember

Section

Articles

License

Copyright (c) 2025 Augusmina Zebua, Kurniawan Sarototonafo Zai, Jeliswan Berkat Iman Jaya Gea, Heniwati Gulo

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 > >>